Verification by ID.me •
What is ID.me?
A genuine Kasco 1/2 HP replacement motor for 2400-series surface aerators, circulators, and VFX aerating fountains — ships assembled with propeller and ready to install.
Your float, mounting accessories, control panel, and power cord (if it has a quick disconnect) can all be reused — there's no need to replace the whole unit when only the motor has failed. Before ordering, check the condition of your existing cord if you plan to reuse it.
Rated for continuous operation with 17mm top and bottom bearings for long service life.
Corrosion-resistant construction suitable for salt water and other harsh environments.
Guards against overheating and damage from excessive, prolonged current draw.
Fully unitized carbon ceramic seal built for reliable long-term submersion.
Every motor undergoes run testing before it leaves the factory to confirm reliable operation.
Backed by Kasco's full manufacturer's warranty.
| Model | Replaces |
|---|---|
| 2400A | 2400A & 2400AF Surface Aerators — ships with propeller & protective wire cage |
| 2400C | 2400CF, 2400CUD, 2400CID Circulators — ships with propeller & clog-resistant cage |
| 2400VFX | 2400VFX Aerating Fountain — ships with VFX propeller & required components |
| Model | Cord | Price |
|---|---|---|
| 2400A | Quick Disconnect w/ Stub Cord (included) | $1,092.00 |
| 2400A | 50 Feet | $1,094.00 |
| 2400A | 100 Feet | $1,292.00 |
| 2400A | 150 Feet | $1,780.00 |
| 2400A | 200 Feet | $1,960.00 |
| 2400C | Quick Disconnect w/ Stub Cord (included) | $1,192.00 |
| 2400C | 50 Feet | $1,194.00 |
| 2400C | 100 Feet | $1,392.00 |
| 2400C | 150 Feet | $1,880.00 |
| 2400C | 200 Feet | $2,060.00 |
| 2400VFX | Quick Disconnect w/ Stub Cord (included) | $1,257.00 |
| 2400VFX | 50 Feet | $1,260.00 |
| 2400VFX | 100 Feet | $1,487.00 |
| 2400VFX | 150 Feet | $1,943.00 |
| 2400VFX | 200 Feet | $2,121.00 |
| Spec | Value |
|---|---|
| Horsepower | 1/2 HP |
| Voltage | 120V, Single Phase |
| Speed | 1,750 RPM |
| Running Amps | 5.0 |
| Cooling | Oil-Cooled, Continuous Duty Rated |
| Bearings | 17mm Top & Bottom |
| Seal | Unitized Heavy-Duty Carbon Ceramic Mechanical Seal |
| Protection | Thermal Overload Protection |
| Daily Operating Cost (24/7) | ~$1.58* |
| Warranty | 2 Years |
*Estimated cost based on average electricity rates; actual cost varies by location.
Which model do I need?
It depends on your equipment: 2400A for surface aerators, 2400C for circulators, and 2400VFX for aerating fountains. Check your unit's model plate if you're unsure, or call us.
Do I need to replace the whole unit, or just the motor?
In most cases just the motor — your float, mounting accessories, control panel, and power cord (if it has a quick disconnect) can all be reused.
Does this come with a propeller?
Yes — each motor ships fully assembled with the correct propeller and protective cage for your model.
Is this suitable for salt water?
Yes — the motor's corrosion-resistant design makes it suitable for salt water and other corrosive environments.
What's the warranty?
This motor is backed by Kasco's full 2-year manufacturer's warranty.
