Verification by ID.me •
What is ID.me?
A distinctive clover-shaped spray — a tall central plume surrounded by angled side jets — that beautifies your pond while adding oxygen and circulation. Available from 1/2 HP up to 1.5 HP.
Two anchor weights and two nylon mooring ropes are required for installation but not included.
The Clover Fountain creates an impressive cascade of water that sounds as beautiful as it looks. Its brass center nozzle sprays a tall, central plume surrounded by separate side nozzles that project an angled spray at 45 degrees — a spectacular pattern similar to the lucky plant it's named for. Beyond the visual appeal, the Clover circulates and oxygenates your water for a healthier aquatic environment.
Like every Scott Aerator fountain, the Clover uses a stainless steel, oil-free submersible motor, making it one of the most environmentally friendly fountains on the market. It's designed to be left in the water year-round — simply shut it off and let it freeze in for the winter, then power it back on after the thaw. Freezing does no damage to the fountain, even in harsh winters.
Tall center plume surrounded by angled side jets for a distinctive display.
Safe to leave in the water year-round, running or not.
Suitable for brackish and salt water installations.
Environmentally friendly, stainless steel submersible construction.
Simple installation with just two anchoring ropes and weights.
2-light sets recommended for 1 HP and below; 4-light sets for 1.5 HP and above.
| 1/2 HP | 1 HP | 1.5 HP | |
|---|---|---|---|
| Voltage | 115V or 230V | 115V or 230V | 230V |
| Amps | 10A (115V) / 10.6A (230V) | 14A | 10.6A |
| Watts | 680W (115V) / 1780W (230V) | 1015W | 1780W |
| Flow Rate | 60 GPM | ~75 GPM | 90 GPM |
| Center Stream Height | 20-40 ft | 30 ft | 40 ft |
| Side Jet Spray | 15-20 ft | 20 ft | 20 ft |
| Min. Pond Depth | 36 in | 36 in+ | 42 in |
| Anchor Weight Needed | 2x 20 lbs | 2x 25 lbs | 2x 20 lbs |
| Standard Cable Length | 70 ft (12-gauge) | 70 ft (12-gauge) | 100 ft (12-gauge) |
| Est. Operating Cost | ~$0.08-0.10/hr | — | ~$0.12/hr |
| Warranty | 5-Year Motor | 5-Year Motor | 5-Year Motor |
GFCI required. 230V motors are hardwired into a panel; 115V motors plug into a standard residential outlet.
Which HP size do I need?
Options range from 1/2 HP up to 1.5 HP depending on your pond's size and desired display height. Call us and we'll help you size it correctly.
Are anchor weights included?
No — two anchor weights (20-25 lbs each depending on HP) and two nylon mooring ropes are required but not included.
Can this be used in salt water?
Yes — the Clover is approved for use in salt water installations, with no added equipment required.
Do I need to winterize this fountain?
No — simply shut it off and leave it in the water through winter. Freezing does no damage, even in harsh climates.
Can I add lighting?
Yes — 2-light sets are recommended for 1 HP and below, 4-light sets for 1.5 HP and above. Lights can be added at purchase or anytime later.
What's covered under warranty?
The Clover is backed by Scott Aerator's unconditional 5-year motor warranty.
